HomeMy WebLinkAboutBid_specs30
ITEM ##18
CUFF CASE
CUFF CASE - Mixon handcuff case model He I with 3" Tiara or approved equal.
ITE~ t# 19
HANDCUFFS
HANDCUFF - peerless handcuffs.
ITEM #20
ASP BATON
ASP BATON - F26C expandable ASP Batons shall consist of three telescoping sections. The outside handle
diameter shall be (one) I inch. The grip of the baton will be constructed of black foamed vinyl held in place with
two concentric bands of double sided adhesive tape. The forward portion of the grip shall be protected by a
retaining sided adhesive tape. The rear of the grip will be protected by a treaded retaining cap that is held in place
by an O-ring seal. The sections of the baton shall be constructed of seamless thick walled 4140 alloy tubing. The
steel shall be heat treated for toughness, shock and break resistance to produce a Rockwell C scale of 48 to 51
with a tensile strength of at least 230,000 PSI. The baton shall weigh approximately 19 ounces with the sections
locking in place by means of a dead lock taper. The handle shall be Zinc Dichroate undercoated and then finished
with black textured powder paint. The shafts shall be finished with silver industrial chrome. The baton shall have
no sharp edges or knurling of any type. All exterior surfaces must be radiused. The baton must be on non-rattle
designs. The baton shall carry a lifetime warranty against splitting or cracking of the shafts, separation of the
shafts or bending that renders the baton non-functional. A retention clip adjustment tool set shall be available for
the batons purchased. A repair and replacement parts shall be provided without charge as part of the bid. A grip
repair kit shall be provided as part of the bid at no charge, also an ASP Armorer's Field Kit at no charge to the
bid.
ITEM #21
ASP BATON HOLDER
ASP BA TON HOLDERS - The baton scabbard shall be made of top grain black patent leather and sewn with
nylon cord using comer stitch construction. The belt loop shall be attached with a military specification one
direction snap and capable of going over a 3" belt. A snap repair kit including anvil and set tool shall be provided
with the cases.
ITEM #22
MAGAZINE POUCHES
MAGAZINE POUCHES - Mixon Model 302-717, Double magazine pouch, high-gloss finish. To fit 3" gun belt,
silver snap closure.
ITEM #23
LEG IRONS
LEG IRONS - Smith and Wesson
~ &~d d-wro
/\I-dO