HomeMy WebLinkAboutBid_specs19
ITEM #5
BICYCLE PANTS
MODEL NUMBER. (OR EQUAL)
Alitta by Fechheimer Brothers Company #A310BK lined High Impact Pant
OUTERSHELL - Dupont's 3-ply finish Supplex 100% Nylon air textured fabric. WARP: 1/70/34 dupont nylon
FILL: 3/70/66 Dupont Nylon. Width: 62"-63". Picks: 61-65 Weight: 3.7-0.3 with stretch in the warp and ill of 0-
4. The residual shrinkage at 120 for Warp and Fill is 4.0%. Tear Test: Elemdorftest is warp 2500 grams and fill
1500 grams. Tensile strength: Warp 190 Ibs. and fill 150 Ibs. Seam Shrinkage: Warp and Fill is 2.0%. The fabric
shall have a spray rating of 100 and be treated with DurepeI water and stain repellent. To ensure maximum
comfort and performance only 3-ply supplex will be acceptable. Color: Black
-<
INTER LINING - Warp knit nylon/lycra 64 gauge 5 oz. Material made of 85% Dupont Antron Nylon and 15%
Lycra Spandex. Stretch: 200% length x 66% width.
CROTCH LINER - Polypropylene foam covered with synthetic suede.
BASIC STYLING - The High Impact: pant shall be a slip-on style made from a pant pattern consisting of 18
pattern pieces, which include two from bellows pockets with pocket flaps, two side pockets, a back patch pocket
with pocket flap and an inset zipper front fly. The inner short shall consist of 6 pattern pieces, constructed of
Nylon/Lycra with a synthetic suede and polypropylene foam pad and 1" gripper elastic at the leg openings. The
inner short shall feature double needle construction for strength. The inner short shall not protrude below the
bottom of the actual short. The seat and crotch has a specially designed bicycle pad sewn to the inner short.
SEWING SPECIFICATIONS - The 3-ply Supplex outershell must be sewn with 12-18 stitches per inch. The
Nylon/Lycra inner short must be sewn with fluff thread to match liner material. The stitches must be 16-20
stitches per inch. The inner short pad must be zig-zag stitched to the Nylon/Lycra short. The inseam
measurements for sizes S-XXL must be finished to a minimum and maximum length as follows:
Outer Short
Min 6 Yi Max 8"
Inner Short
Min 5" Max 6"
POCKETS - The two front bellows pockets shall be 7 Yi"wide x 6 Yi" deep, with nylon supplex flaps overlapping
the pocket and two Velcro tabs closures. The two side pockets shall be a standard 6" deep using supplex fabric.
The back pocket shall be 7 Yi" long x 2 ~" wide pocket flap, which shall be constructed of a double piece of
supplex with black interfacing and sewn on Velcro strips for closures. Top edge of flap shall have two rows of
single needle stitching, and the rest of the pocket shall be finished with a single row of single needle stitching.
The inside edge of the pocked flap shall be overlooked and stitched down.
WAISTBAND - The waistband shall be a 2 ~" wide elastic band with a drawstring waist and a continuous,
closed waistband that is sewn with a multi-needle chain stitch. There shall be four nylon web Velcro fasteners
(keepers) sewn into the waistband to support a nylon Sam Browne belt. The two nylon fasteners in the front shall
be approximately in the middle of each front bellows pocket. The two nylon fasteners in the back shall be
approximately in the middle of each rear pocket. The keepers shall be at least 6" continuous top to bottom xl"
wide.
PANT LEGS - The pant legs shall have a 6" zipper at the bottom of each leg on the outside. There shall also be a
supplex strap with sewn on Velcro closures at the bottom of each leg on the outside. There shall also be a supplex
trap with sewn on Velcro closures at the bottom of the leg, positioned at approximately the top of the zipper, to
secure the leg.
~~~ #-/'1