HomeMy WebLinkAboutBid_specs18
ITEM #4
MOTORCYCLE PANTS
RICHMOND COUNTY SHERIFF'S OFFICE MOTORCYCLE PANTS
FABRIC - Raeford #6038-11000, 75% Dacron/25% wool weave: 2 up-2 down right hand twill 11 Y!-I2 oz.
Breaking strength: 90 lbs warp, 175 lbs. filling construction: 7 ends/inch 7 picks/inch color: Black. Fabric to be
manufactured utilizing yam spun on the long staple fiber length worsted spinning system. The average individual
staple length shall be 3 Y2.
DESIGN - Pants shall be manufactured from up to date patterns and shall be designed so that there will be a
slight "peg" at the hip, and no baggy seat. The front shall be plain (no pleats) with (2) top pockets, two (2) hip
pockets with flaps to button, one (1) club pocket below right hip pocket and two (2) watch pockets. All,Pockets
shall be bartacked with diamond bartacks except for the watch pocket which is to have straight bartacks. Hip
pockets will be of the double welt method, manufactured on Reece PW Machine, and shall be finished in such a
manner that there is no topstitching. The welt shall be interlined with Pelion.
POCKETING - The pocketing shall be 70% Polyester/30% Cotton, 2.9 oz per square yard (60") with a minimum
78 X 64 count. Pocketing must have a durable press finish and the color of the pocketing must be black.
WAISTBAND - Waistband curtain to be of the same fabric as the pocketing and shall close with a hook and eye.
The waistband curtain must be attached to the trouser with a zigzag stitch. There must also be Snugtex waistband.
FL YLINING - The right ,fly shall be the same fabric and color as the waistband and pocketing. The right fly
lining must be sewn to the left fly below the zipper with strong closure and smart appearance. There shall be a
French Fly closure on the inside of the right fly, and the fabric for the French Fly must be the same as the outer
material of the trousers.
BELT LOOPS - There shall be 6 belt loops, %# wide, of double thickness, and each loop must be interlined with
a non-woven fabric. All loops (except for the back center loop) must be sewn into the bottom of the waistband,
and the top of all loops shall be caught into the waistband curtain seam. The waistband shall measure
approximately 2" wide when finished, wide enough to comfortably accommodate a belt 1 5/8" wide. The back
center loop shall be 1" wide.
MISCELLANEOUS - Pants must have a Talon #42 Memory Lock Zipper, the tape of which has pennanent press
finish, and there shall be a bartack at the bottom of the fly, going through the zipper tape. The pants must be
seamed with matching thread and the seat must be stitched with a Tandem needle machine (2 threads). All
exposed inside edges must be serged. Pants to have a full calvary reinforcement cut square at the top and not to
be more than 3/8" from the hip pocket. Bottoms of pants shall have zipper closures.
STRIPE - AI" black cloth nylon twist stripe on bottom of the waistband to the bottom of pants leg.
LABELS - Pants must have a care label permanently affixed that also indicated the size. A paper thicket showing
the size, fabric content, cut number and WPL number must be on the outside of the waistband. Garment must be
made in the United States of America and bear a union label.
5~ ~ Jwct r/-13